Bali Spot International Co.,Ltd
Furniture and Outdoor Furniture Manufacture Specialist
from picture above to see our product department
FURNITURE PRODUCT KNOWLEDGE
of appliance is self-owned, so do not wait and the
production must be fast.
We inform you that some technical matters that we thought
you should know about the quality of our products. Please
kindly revert to the below pictures: The weakness of
furniture that uses white color is the white color will be
yellow later. In order not to turn yellow, usually we
usedThe acrylic materials, however the acrylic material is
so expensive. The melamine, however melamine material makes
the furniture be odor
We create a new developer, the white–off color, which is
resistant to the yellow.
several licenses from Bereau of Home Furnishings and Thermal
Insulation from the state of California, Department of
consumer affairs, such as below:
that we use are made from alummunium material and not made
from iron. The weakness of the iron nail is rust. A rusty nail
can make the wicker irrespective.
For the framework of the furniture, we also use the aluminum.
It can survive and does not easily rust or corroded.
In this wicker furniture business some factories make the
frame by used or wasted frame, based on this picture of the
frame used is brand new and fresh material. It indicates by
the shining looks and well-organized forms. People will not
know after painted, yes it is. But when the weaving applied
the experienced ones will know that the used / wasted frame
will create unconsistency weaving pattern that could be
noticed when you reflected the light on the suspicious area or
you just shut your eyes and touch its surface slowly.
You see Pic. 01 you may notice that we put our concern and
high attention on the construction of this table. Some says it
is useless to use double bar and double edge frame. Yes, we
could cut cost but in the end the client will suffer as the
table will shaky when used or cannot hold the weight put on
the top table even for the glass top, for instance.
Here is a
new type of coastal colors that we can make, more trendy and
For raw material of wood, raw rattan is dried first by using
the sun in the field, as seen in the place below.
In order for
raw materials free of termite egg, then the raw materials
dipped in a liquid DTN or prevail. Other methods that usually
used are not using prevalí, but only kill the termites, how
ever the termite eggs still exist, eventually in the future,
the termites can reappear and make the furniture to be
material baked in a dry kiln to reduce the moisture levels,
the moisture must be 10% (moisture content <10%)
Moisture content of more than 10% causes the timber broken in
the event of a change of temperature that drastic.
In a baked,
we soaked all of the wood first, then make a gradual drying so
as not to damage the wood structure.
room has a 5 point that used to check the humidity level.
that heated is using a stove that using wood as its fuel.
equipment is a control tool to see the moisture content
Rattan that has been dried, we keep in a special room and
covered with plastic, so that the moisture level does not rise
Room of the
raw materials that have been oven.
that have been measure the diameters, one by one stored based
on the diameter and species of rattan.
Classification of rattan size
storage that has been classified by type and size.
The leight of rattan material can reach 6 meters
cut cane in accordance with our desired size
Tools to refine
Place for the
treatment of rattan and wood in order to make it not easy to
mold and anti-termites.
Wood or canes
given medicine prevail
Planner machine: a
tool for smoothing the wood
We have 3 kinds of
- Planner 1 side, to smooth 1 side
- Planner 2 sides: to smooth 2 sides
- Planner thick, for the thick wood
machines for cutting wood with a certain angle.
Our machine is
made of German so that we can produce products with a high
level of precision
The machine to cut
the 4 sides of the precision, usually used to create a
plywood makes the surface is wider.
Sliding table for
manufacturing the plywood
The spindle blade
is using to make the grooves and circle part, with a high
speed engine so that it can produce the surfaces smooth.
Some of the
techniques that use to make the cheaper furniture is
manufacturing the frame from wood, then covered the MDF, so it
looks like solid wood.
Cutting tools to
flatten the left and right
The tools to cut
and flatten the top and under
cylinder: the tool for smoothing wood
The tool for
holeing the wood, drills, so it can be used for assembling
(knock down furniture)
The results that
have been hole
The tool for
smoothing and straightening
Steples for Wicker
The final sending
Final check area
Master color paint
before stuffing to container